Kraznet Report post Posted January 2, 2018 Here is my first tutorial for 2018 showing you how to set up Samplitude Pro X3 to communicate with Sound Forge Pro and Spectral Layers Pro. Regards, Kraznet Share this post Link to post Share on other sites
Bob Olhsson Report post Posted January 2, 2018 Is there a way to also add iZotope RX to that menu? Sometimes it works better than Spectral Layers and vice-versa. Share this post Link to post Share on other sites
Kraznet Report post Posted January 2, 2018 Hi Bob, If you click on the "Add" button and browse to the iZotope executable it will be added to the list. I don't have RX but I made a GIF showing how to add Melodyne stand-alone. Although you will also need to name it in the l external tools window. Regards, Kraznet Share this post Link to post Share on other sites
Bob Olhsson Report post Posted January 2, 2018 That worked getting to RX but I don't seem to be getting it back to Samplitude. Share this post Link to post Share on other sites
Kraznet Report post Posted January 2, 2018 Just now, Bob Olhsson said: That worked getting to RX but I don't seem to be getting it back to Samplitude. I just downloaded the RX demo let me do a test and see if I can find out how it works with Samplitude. Regards, Kraznet Share this post Link to post Share on other sites
Kraznet Report post Posted January 2, 2018 Hmm unfortunately the demo doesn't allow me to save so it severely limits me testing it. Did you try choosing "Overwrite original file"? Does that affect the file in Samplitude? Regards, Kraznet Share this post Link to post Share on other sites
Bob Olhsson Report post Posted January 2, 2018 I haven't tried that yet. It also didn't allow me to save so I think there may be some kind of permissions issue. Share this post Link to post Share on other sites
Kraznet Report post Posted January 3, 2018 4 hours ago, Bob Olhsson said: I haven't tried that yet. It also didn't allow me to save so I think there may be some kind of permissions issue. I'm not sure how much testing they did with third-party editors. I think their focus was on integrating Sound Forge and Spectral Layers. My tests show that you can save edits from Melodyne stand-alone linked this way. I was trying to test Wavelab 9 while back but I only had the demo so hence the same problem with saving. It also works with Har-Bal which I tested quite a while ago. Regards, Kraznet Share this post Link to post Share on other sites
Ron MacNutt Report post Posted January 3, 2018 I just performed a small test. Selecting "Overwrite Original File" does send the corrected file back from RX to Samplitude. Izotope suggest an alternative method here (I haven't tried this yet): https://www.izotope.com/en/support/knowledge-base/how-to-use-rx-connect-with-magix-sequoia-samplitude.html Share this post Link to post Share on other sites
Kraznet Report post Posted January 3, 2018 Thanks for testing @Ron MacNutt That's very interesting the alternative method, thank you for the link. Regards, Kraznet Share this post Link to post Share on other sites
Bob Olhsson Report post Posted January 3, 2018 That's how it works in Pro tools but it hadn't occurred to me it would be available in the Wave-Editing Plug-ins. Share this post Link to post Share on other sites